About Torque Tech

An industrial parts counter that has been supplying the Mid North Coast since 1987, and the rest of the country since the website went up.

Supplying the Mid North Coast since 1987

Torque Tech has supplied industrial parts out of Port Macquarie since 1987. Workshops, farms, contractors and councils from Coffs Harbour down to Forster, and inland through Wauchope, Kempsey and South West Rocks, have been ordering off the same counter for close to forty years.

A bearing for a slasher, a drive package for a conveyor, a seal kit that has to be on the machine before knock-off. If it turns, drives or seals, it is the sort of thing we keep, for:

  • Agriculture and farm machinery
  • Transport, earthmoving and civil
  • Construction and mining
  • Horticulture, turf and mowing
  • Manufacturing and general maintenance

Trade and retail get the same counter and the same range. There is no account to open and no minimum order, whether you run a fleet or you are fixing one mower.

When something is down you can ring the counter and talk it through with someone who can go and look at the part, rather than filling in a form and waiting. The shop holds a 5.0 rating across 20 reviews on Google.

The Torque Tech unit at 2/22 Janola Circuit, Port Macquarie

What we carry

Bearings, belts, hose and fittings, chain and sprockets, seals, lubricants, electric motors and gearboxes. Metric and imperial, from a single oil seal to a full drive package.

  • 6000 and 6200 series, taper roller, thrust, slew and pillow blocks
  • V-belts in A, B, C, SPZ, SPA and SPB, plus timing belts and mower belts
  • Pulleys, taper lock bushes, jaw and HRC couplings
  • Roller chain and sprockets, British 06B to 16B and ANSI
  • TC oil seals from 25mm, O-rings and V-seals, nitrile and viton
  • Hydraulic and air hose, camlocks, brass and hose fittings
  • Three phase motors from 0.37kW, gearboxes, bases and slide rails

We are an authorised distributor for Koyo, PIX, KCM and FYH, and we cross other makers' numbers to what fits. Every part on the site lists its sizes and specifications, so you can check it against the old one before you order.

Alongside those four we carry NTN and Nachi bearings, Bonfiglioli, NORD, SEW Eurodrive, Sumitomo and Hydromec gearboxes, WEG and TECO motors and Seagull Oils lubricants. More than twenty brands in all, and if you would rather have a particular make than the cheapest equivalent, say so and that is what you will get.

The parts counter at Torque Tech in Port Macquarie

Over the counter or Australia wide

Call in and we will match the part on the spot, or order from anywhere in the country and we will send it out. Same range either way.

There is no checkout. Ordering runs like this:

  • Search a part number, or browse the range by size
  • Add what you need to your quote list
  • Send it through with your postcode
  • We confirm what is available and the price with freight
  • Nothing is charged until you say go

If all you have is the number stamped on the old part, or the three measurements off a seal, send that. A photo of what came off the machine is usually enough to work from as well, and you can ring the counter on (02) 6581 0860 if it is easier to talk it through.

Collecting is just as easy. Order it the same way, tell us you will pick it up, and it will be on the counter in Port Macquarie waiting for you rather than going out on freight.

The entrance to Torque Tech at 2/22 Janola Circuit, Port Macquarie

The shop

Phone(02) 6581 0860
Emailsales@torquetech.au
Address2/22 Janola Circuit, Port Macquarie, NSW 2444
OpenMonday to Thursday 7.30am to 4.30pm, Friday 7.30am to 3.30pm

Part enquiryEst. 1987

Can't find the part you need?

Not everything we stock is listed. Send the part number, the size, or what it came out of and we will sort it.

Part enquiry

Your details are only used to answer you.