Bearings, hoses and belts in Port Macquarie
The counter is at 2/22 Janola Circuit. Bring the old part in and we will match it against the shelf on the spot, and if you would rather not make the trip twice, ring first and we will have it waiting.
The shop
| Phone | (02) 6581 0860 |
|---|---|
| sales@torquetech.au | |
| Address | 2/22 Janola Circuit, Port Macquarie, NSW 2444 |
| Open | Monday to Thursday 7.30am to 4.30pm, Friday 7.30am to 3.30pm |
Ring ahead
Quickest way to know we have it. Give us the part number, or the three measurements off the old one, and we will check the shelf while you are on the phone and put it aside.
What is on the shelf in Port Macquarie
Carried in the sizes and series that actually get asked for over the counter, not a catalogue of everything that exists. Metric and imperial, open, sealed and shielded, in the series a slasher, a conveyor, a pump or a mower actually runs. Everything below is on the shelf in Port Macquarie and listed on the site, so you can check the size before you drive over.
Finding us in Port Macquarie
Janola Circuit runs off Uralla Road, in the industrial estate on the western side of Port Macquarie. We are unit 2 of number 22: look for the blue awning over the glass door with the roller door beside it, and the number on the letterbox at the driveway.
Parking is off the street and right at the door, with room to bring a ute or a trailer in, so a gearbox does not have to be carried across a car park. The counter is straight through the glass door.
- Unit 2 at number 22, blue awning over the glass door
- Off street parking at the door
- Roller door for anything you cannot carry
- Open Monday to Friday, closed weekends
What to bring to the counter
You do not need a part number and you do not need to know what it is called. Any one of these is usually enough to get you the right part on the spot.
- The old part, even in pieces. The markings are usually still readable
- For a bearing, the three measurements: bore, outside diameter and width
- For a belt, the length and the section stamped on the back
- For a hose, the old tail and the thread, or the fitting off each end
- For a seal, the shaft size and the housing bore
- The make and model of the machine, or a photo on your phone
Bore, outside diameter and width. Those three numbers are enough.
Who we supply around Port Macquarie
The counter runs on people whose machine has stopped and who need the part today, not next week. Some of them have the number off the old one, most have the part in a rag on the passenger seat, and a fair few only know what it came out of. All three are fine.
- Mowing, turf and landscaping contractors
- Earthmoving, civil and transport crews
- Farms, orchards and rural properties
- Workshops, mechanics and fitters
- Councils and facilities maintenance
- Anyone with a bearing, belt, hose or seal to match
Coming to Port Macquarie from out of town
Most of the Mid North Coast is inside an hour or so of the counter. If you are driving in from Wauchope, Kempsey, Laurieton or the Camden Haven, or further out from Taree, Forster, South West Rocks or Coffs Harbour, ring the number above with the part number or the three measurements off the old one and we will have it on the counter when you get here.
Ringing ahead is worth the two minutes. We will check the shelf while you are on the phone, put the part aside under your name, and it will be on the counter when you walk in. Nothing is charged to hold it and there is no account to open.
If the trip is not worth it, the same range ships. Build a list on the site, send it through with your postcode, and the price comes back with the freight in it. Most of what leaves the counter goes out the same day it is ordered.
Questions we get at the counter
Do I need the part number?
No. Bring the old part in and we will match it on the counter. If you cannot get it off the machine, the three measurements off a bearing, bore, outside diameter and width, or a photo of the housing is usually enough to work from.
Can I pick it up today?
If it is on the shelf, yes. Ring the counter with the number or the size and we will put it aside so it is waiting when you get here.
What are your opening hours?
Monday to Thursday 7.30am to 4.30pm and Friday 7.30am to 3.30pm. We are closed weekends and public holidays, so if you need something for a Saturday job it is worth calling in on the Friday.
Where exactly in Port Macquarie are you?
2/22 Janola Circuit, in the industrial estate off Uralla Road. Unit 2 is the one with the blue awning over the glass door, with the roller door beside it and parking straight out the front. There is a map further down this page.
Is there parking?
Yes, off street and right at the door. There is room to pull a ute or a trailer in, so you do not have to carry a gearbox across a car park.
Do you sell to the public or trade only?
Both. There is no account to open and no minimum order. Walk in, or send a list through the site.
What if I do not know what size I need?
Bring the old part, or the machine if it is small enough. Between the measurements, the housing and what it came out of we can almost always get to the right part without a number.
What brands do you carry?
Koyo, NTN, Nachi and FYH in bearings, PIX in belts, KCM in chain, and Bonfiglioli, NORD, SEW Eurodrive, Sumitomo, Hydromec, TECO and WEG in drives and motors. More than twenty in all.
What if the part is not listed on the site?
Not everything on the shelf is listed yet. Send the number, the size, or what it came out of and we will tell you what we have.
Do you deliver outside Port Macquarie?
Yes, Australia wide. Send your list through with your postcode and the price comes back with the freight in it.
The shop
| Phone | (02) 6581 0860 |
|---|---|
| sales@torquetech.au | |
| Address | 2/22 Janola Circuit, Port Macquarie, NSW 2444 |
| Open | Monday to Thursday 7.30am to 4.30pm, Friday 7.30am to 3.30pm |
Part enquiryEst. 1987
Can't find the part you need?
Not everything we stock is listed. Send the part number, the size, or what it came out of and we will sort it.
Your details are only used to answer you.