Inner Ring 1-1/4 in bore

  • Bore 1-1/4 in
  • Diameter 1-1/2 in
  • Width 16.25 to 32.13 mm

Choose your option

Size Part number BoreODWidth Quantity Add to quote
1-1/2 in x 16.25 mm, Shell Needle Roller
IRB2010/IKO 1-1/4 in 1-1/2 in 16.25 mm 1-1/4 x 1-1/2 x 16.25 mm
1-1/2 in x 22.60 mm, Shell Needle Roller
IRB2014/IKO 1-1/4 in 1-1/2 in 22.60 mm 1-1/4 x 1-1/2 x 22.60 mm
1-1/2 in x 25.65 mm, Machined Needle Roller
LRB202416/IKO 1-1/4 in 1-1/2 in 25.65 mm 1-1/4 x 1-1/2 x 25.65 mm
1-1/2 in x 25.78 mm, Shell Needle Roller
IRB2016/IKO 1-1/4 in 1-1/2 in 25.78 mm 1-1/4 x 1-1/2 x 25.78 mm
1-1/2 in x 32 mm, Machined Needle Roller
LRB202420/IKO 1-1/4 in 1-1/2 in 32 mm 1-1/4 x 1-1/2 x 32 mm
1-1/2 in x 32.13 mm, Shell Needle Roller
IRB2020/IKO 1-1/4 in 1-1/2 in 32.13 mm 1-1/4 x 1-1/2 x 32.13 mm

Full specifications

Bore diameter (d)1-1/4 in
Outside diameter (D)1-1/2 in
Width (B)16.25 to 32.13 mm
Measurement systemImperial

Published figures. The exact size is on the option you choose.

About inner rings

Hardened inner rings that give a needle roller bearing a proper raceway on a soft shaft

See the whole inner rings range

Other sizes in this range

Listed by bore, smallest first.

Image
Part
Bore
Outside diameter
Add to quote
Inner Ring 1/2 in bore 1/2 in bore, IKO
1/2 in
—
Inner Ring 1 in bore 1 in bore, IKO
1 in
—
Inner Ring 1-1/8 in bore 1-1/8 in bore, 1-3/8 in OD, IKO
1-1/8 in
1-3/8 in
Inner Ring 1-3/8 in bore 1-3/8 in bore, 1-5/8 in OD, IKO
1-3/8 in
1-5/8 in
Inner Ring 1-1/2 in bore 1-1/2 in bore, IKO
1-1/2 in
—
Inner Ring 1-5/8 in bore 1-5/8 in bore, 2 in OD, IKO
1-5/8 in
2 in
Inner Ring 1-3/4 in bore 1-3/4 in bore, 2-1/4 in OD, IKO
1-3/4 in
2-1/4 in
Inner Ring 1-7/8 in bore 1-7/8 in bore, 2-1/8 in OD, IKO
1-7/8 in
2-1/8 in
Inner Ring 2 in bore 2 in bore, 2-1/2 in OD, IKO
2 in
2-1/2 in
Inner Ring 2-1/4 in bore 2-1/4 in bore, 2-3/4 in OD, IKO
2-1/4 in
2-3/4 in
Inner Ring 2-1/2 in bore 2-1/2 in bore, 3 in OD, IKO
2-1/2 in
3 in

See all 66 sizes in Inner Rings

Other parts for a 1-1/4 in shaft

Same shaft size.

Image
Part
Bore
Add to quote
CR Seal 1-1/4 in bore 1-1/4 in bore, Cr Seals CR Seals
1-1/4 in
Imperial Seagull Oil Seal 1-1/4 in bore 1-1/4 in bore, Seagull Imperial Seagull Oil Seals
1-1/4 in
Shaft Repair Sleeve 1-1/4 in bore 1-1/4 in bore Shaft Repair Sleeves
1-1/4 in
Seagull Oil Seal 1-1/4 in bore 1-1/4 in bore, Seagull Viton Seagull Oil Seals
1-1/4 in
Sprocket Weld Fit Hub XT Series Hub + 1/4 Keyway 1-1/4 in bore XT-1-1/4-1/4KEY Weld-Fit Hubs
1-1/4 in

The shop

Phone(02) 6581 0860
Emailsales@torquetech.au
Address2/22 Janola Circuit, Port Macquarie, NSW 2444
OpenMonday to Thursday 7.30am to 4.30pm, Friday 7.30am to 3.30pm

Part enquiryEst. 1987

Can't find the part you need?

Not everything we stock is listed. Send the part number, the size, or what it came out of and we will sort it.

Part enquiry

Your details are only used to answer you.