Taper Roller Bearing 20 mm bore

  • Bore 20 mm
  • Diameter 42 to 52 mm
  • Width 15 to 22.25 mm

Choose your option

15 sizes
Size Part number BoreODWidth Quantity Add to quote
42 x 15 mm, Tapered, Economy
32004X/ECO 20 mm 42 mm 15 mm 20 x 42 x 15 mm
42 x 15 mm, Tapered, Koyo
32004JR/KOYO 20 mm 42 mm 15 mm 20 x 42 x 15 mm
42 x 15 mm, Tapered, Nachi
32004J/NACHI 20 mm 42 mm 15 mm 20 x 42 x 15 mm
47 x 15.25 mm, Tapered, Economy
30204/ECO 20 mm 47 mm 15.25 mm 20 x 47 x 15.25 mm
47 x 15.25 mm, Tapered, Koyo
30204JR/KOYO 20 mm 47 mm 15.25 mm 20 x 47 x 15.25 mm
47 x 15.25 mm, Tapered, Nachi
30204J/NACHI 20 mm 47 mm 15.25 mm 20 x 47 x 15.25 mm
47 x 19.25 mm, Tapered, Economy
32204/ECO 20 mm 47 mm 19.25 mm 20 x 47 x 19.25 mm
47 x 19.25 mm, Tapered, Koyo
32204JR/KOYO 20 mm 47 mm 19.25 mm 20 x 47 x 19.25 mm
47 x 19.25 mm, Tapered, Nachi
32204J/NACHI 20 mm 47 mm 19.25 mm 20 x 47 x 19.25 mm
52 x 16.25 mm, Tapered, Economy
30304/ECO 20 mm 52 mm 16.25 mm 20 x 52 x 16.25 mm
52 x 16.25 mm, Tapered, Koyo
30304AJR/KOYO 20 mm 52 mm 16.25 mm 20 x 52 x 16.25 mm
52 x 16.25 mm, Tapered – (20 52 16.25), Nachi
30304J/NACHI 20 mm 52 mm 16.25 mm 20 x 52 x 16.25 mm
52 x 16.25 mm, Tapered – 31304, Nachi
30304DJ/NACHI 20 mm 52 mm 16.25 mm 20 x 52 x 16.25 mm
52 x 22.25 mm, Tapered, Koyo
32304JR/KOYO 20 mm 52 mm 22.25 mm 20 x 52 x 22.25 mm
52 x 22.25 mm, Tapered, Nachi
32304J/NACHI 20 mm 52 mm 22.25 mm 20 x 52 x 22.25 mm

Full specifications

Bore diameter (d)20 mm
Outside diameter (D)42 to 52 mm
Width (B)15 to 22.25 mm
Measurement systemMetric

Published figures. The exact size is on the option you choose.

About taper roller bearings

Cup and cone bearings for combined radial and thrust loads; wheel hubs, gearboxes and axles

See the whole taper roller bearings range

Other sizes in this range

Listed by bore, smallest first.

See all 41 sizes in Taper Roller Bearings

Other parts for a 20 mm shaft

Same shaft size.

Image
Part
Bore
Outside diameter
Add to quote
High Temperature Bearing 20 mm bore 20 mm bore, ENC High Temperature Bearings
20 mm
—
Locking Assembly 20 mm bore 20 mm bore Locking Assembly
20 mm
—
Metric Seagull Oil Seal 20 mm bore 20 mm bore, Seagull Metric Seagull Oil Seals
20 mm
—
Shaft Repair Sleeve 20 mm bore 20 mm bore Shaft Repair Sleeves
20 mm
—
Tensioner 20 mm bore 20 mm bore, Rosta Tensioners
20 mm
—
V-Rings 20 mm bore 20 mm bore, 28 mm OD V-Rings
20 mm
28 mm
Seagull Oil Seal 20 mm bore 20 mm bore, Seagull Viton Seagull Oil Seals
20 mm
—

The shop

Phone(02) 6581 0860
Emailsales@torquetech.au
Address2/22 Janola Circuit, Port Macquarie, NSW 2444
OpenMonday to Thursday 7.30am to 4.30pm, Friday 7.30am to 3.30pm

Part enquiryEst. 1987

Can't find the part you need?

Not everything we stock is listed. Send the part number, the size, or what it came out of and we will sort it.

Part enquiry

Your details are only used to answer you.